Product fit for preventive disinfection of supports to be covered with PCV-P waterproof membrane.
FLAGPOOL SANITARY may be used on new masonry and concrete structures, but it must be applied in case of refurbishing on already existing swimming pools with PVC-P
FLAGPOOL SANITARY is a Preventol Bayer-based product


PRODUCTION STANDARD

250 ml bottle.

Solution 2,5%

INSTRUCTIONS FOR USE

The product must be stored, adequately sealed, in a dry and ventilated place.

• remove the old PVC membrane
• leave the structure free and ventilated one day long
• Thoroughly clean the structure with sodium hypochlorite (until the whole support is clean)
• let the structure dry
• dilute 250 ml of Flagpool Sanitary in 10 liters of water (solution at 2.5%)
• mix well before use
• use a fit roller to evenly spread the product (do not spray)
• let the structure dry
• repeat the “sanitization”
• let the structure dry
• set the new PVC
• the solution allows treating a surface of about 35 m2 (according to the roughness and porosity of the surface)

NOTE: The sanitization of the structure may be useless in case of water infiltration in the structure and/or in case of rain.

	FLAGPOOL SANITARY Technical data sheet